Desk Drawer Organizer STL Generator
Shallow desk drawers fill up with pens, chargers and sticky notes. Give each item a home: enter your drawer size and print an organizer that fits it exactly.
The 3D preview loads automatically.
Layouts that work on a desk
- Pens and pencils: one long row across the front – set rows to 1 and use a compartment depth of about 160 mm so pens lie flat.
- Cables and chargers: fewer, bigger cells (2 × 1 or 2 × 2) so coiled cables fit without kinking.
- Small supplies: clips, pins and erasers like square cells of 40–50 mm. Use 4 × 3 or 5 × 3 in a 200 × 150 mm drawer.
- Mixed use: print two boxes – one with a few large cells and one with many small cells – and place them next to each other.
Height for shallow drawers
Desk drawers are often only 50–70 mm tall inside, and the opening is lower than the drawer itself. Measure the space between the top of the drawer side and the bottom of the desk frame, then keep the organizer at least 5 mm below that. A height of 35–45 mm suits most office drawers.
Other organizers
Drawer organizer generatorEnter your drawer size, pick the compartments and download a free, ready-to-print STL. Parametric, works in your browser, mm or inches.Kitchen drawer organizerMake a 3D-printed utensil and cutlery organizer that fits your kitchen drawer. Split big drawers into printable modules. Free STL.Small parts storage boxGenerate a 3D-printable compartment box for screws, nuts, beads or electronic parts. Choose the grid, get a free STL that fits your bed.